October 27, 2026 in General Plumbing, Leak Detection

Tap Pressure Low? Work Out What’s Causing It

Tap Pressure Low? Work Out What’s Causing It: Feature Image

Low water pressure can make everyday tasks frustrating, from washing your hands to filling the kitchen sink. If your tap pressure is low, you probably want to know what’s causing it and how to fix it without unnecessary expense.

The first step is to work out whether the problem affects one tap, the hot or cold water supply, or several outlets around your home. A blocked aerator or restricted connection could affect a single tap, while a problem with the incoming water supply may affect the entire property.

If you’ve searched for “tap pressure low”, the quickest way to find the cause is to work out whether the problem affects one tap, your hot water, or your entire home.

In this guide, we’ll help you identify the likely cause, walk you through practical checks you can try yourself and explain when to contact a plumber.

Table of Contents

First: Is the Problem One Tap or the Whole House?

Before attempting a repair, check how widespread the problem is. Turn on a few taps around your home and compare their flow, checking the hot and cold water separately where possible.

The pattern can help you narrow down the cause and decide what to try first.

What you notice Likely cause What to try first
One tap has weak flow, but other taps work normally Blocked tap aerator, restricted connection or faulty tap component Check and clean the removable aerator according to the manufacturer’s instructions.
The hot tap has weak flow, but the cold tap works normally Hot-water system issue, restricted pipe or partially closed valve Compare other hot taps to see whether the problem affects one fitting or the whole hot-water supply.
The cold tap has weak flow, but the hot tap works normally Restriction in the cold-water supply or tap Check other cold taps and inspect the accessible connections on the affected tap.
Several taps have weak flow Shared pipework restriction, valve issue or incoming supply problem Check whether the main stopcock is fully open, provided it is safely accessible.
Water pressure is low throughout the house Incoming supply issue, faulty pressure-reducing valve or leak Contact your water supplier if you suspect a supply problem, or a plumber if the cause appears to be within your property.
Water pressure drops when using two taps Limited available supply or a restriction in the plumbing system Compare the flow with one tap running and both taps running. If the drop is significant, arrange a plumbing assessment.
The problem started after plumbing work Partially closed valve, debris or restricted connection Check the accessible valves and contact the plumber who carried out the work if the problem persists.
A new tap has weaker flow than the old one Different flow restrictor, pressure requirements or installation issue Check the manufacturer’s specifications and confirm that the tap is compatible with your water supply.

These checks help you narrow down the likely cause before spending money on replacement parts. Once you know which outlets are affected, you can move on to the appropriate troubleshooting steps.

How To Fix Low Tap Pressure Yourself

If your tap pressure low, follow these steps in order. Start with the simplest checks before attempting anything that involves dismantling fittings or working on your plumbing system.

Step 1: Compare the Water Flow

Turn on the affected tap and observe how strongly the water flows. Then check a few other taps, including the hot and cold supplies separately where possible.

Low water pressure from a bathroom tap with a weak stream of water

  • If only one tap is affected, focus on its aerator, connections and internal components.
  • If only the hot water is affected, investigate the hot-water supply.
  • If only the cold water is affected, check the cold-water supply and the affected tap’s connections.
  • If several taps have weak flow, investigate the shared supply or contact your water supplier if you suspect an external problem.

What next? If the problem is limited to one tap, move on to checking the aerator. If several outlets are affected, skip to Step 3.

Step 2: Check and Clean the Tap Aerator

A blocked tap aerator is one of the simplest things to check when a single tap has weak flow. The aerator is the small fitting at the outlet that helps regulate the water stream and mix air into it.

Person removing a tap aerator to check for blockages causing low water pressure

To check it:

  1. Look at the end of the tap to see whether it has a removable aerator.
  2. If it can be removed safely, follow the manufacturer’s instructions to take it off. Protect the finish with a soft cloth if using a suitable tool.
  3. Rinse away loose debris and clean any limescale according to the manufacturer’s guidance.
  4. Refit the aerator correctly and turn on the tap to check whether the flow has improved.

Avoid forcing a stuck fitting, as this could damage the tap. If the aerator is built in or cannot be removed safely, ask a plumber to inspect it.

What next? If the flow improves, the blockage was likely contributing to the problem. If the water is still trickling, check the accessible isolation valve and consider whether an internal component or connection is restricted.

Step 3: Check the Main Stopcock and Accessible Isolation Valves

A partially closed stopcock can restrict the water entering your home, while a partially closed isolation valve can affect an individual tap.

The main stopcock controls the incoming water supply and is often found beneath a kitchen sink or near where the supply pipe enters the property. An isolation valve for an individual tap is commonly located beneath the relevant sink or basin.

Person checking a stopcock valve to identify possible causes of low water pressure

If a valve is safely accessible, check whether it appears to be fully open. Only adjust a valve if you understand how it operates and can do so without forcing it. Do not turn a stiff, damaged or leaking valve, and do not dismantle any connections.

What next? If the valve is already fully open, or adjusting an accessible valve does not improve the flow, there may be a restriction elsewhere. If several taps are affected, contact a plumber or investigate a possible incoming supply issue.

Step 4: Look for Visible Problems With the Connections

Flexible hoses, often called flexi connections, supply water to many kitchen and bathroom taps. A hose that is kinked, crushed or visibly damaged may restrict the flow.

Look beneath the sink or basin for obvious kinks, crushing, damp patches or signs of leaking. Do not disconnect the hoses or loosen fittings to investigate, as water may escape under pressure.

Leaking sink pipe showing a cause of low water pressure

What next? If you notice damage, a leak or an obvious restriction, arrange a plumbing inspection. If the connections appear normal, the problem could involve the tap’s internal components or the wider water supply.

Step 5: Consider Recent Plumbing Work or a New Tap

Think about when the problem started. If the flow dropped after a tap replacement or plumbing repair, a valve may not have been fully reopened, debris may have entered the fitting, or a hose may have been left kinked.

Plumber inspecting under-sink plumbing connections to look for any causes affecting water pressure

If a new tap was installed, check the manufacturer’s specifications to confirm that it is suitable for your home’s water pressure and hot-water system.

What next? Contact the plumber who carried out the work if the problem began immediately afterwards. Explain which taps are affected and what you have already checked so they can investigate the relevant components.

Step 6: Know When to Stop Troubleshooting

If these checks do not resolve the problem, avoid dismantling taps or pipework in an attempt to find the cause. A restriction inside the tap, a faulty valve, a supply issue or a hidden leak may require professional investigation.

Contact your water supplier if you suspect a problem with the incoming supply. Contact a plumber if the issue appears to be within your home’s plumbing, if several taps have suddenly developed weak flow, or if you notice signs of a leak.

The following sections explain the possible causes in more detail, so you can better understand what may be happening and what a plumber might need to investigate.

Why Is Only One Tap Low Pressure?

Low water pressure in one tap, while the rest of your home has a normal supply, usually points to a problem with the tap or its immediate connections.

Blocked Tap Aerator

The aerator is the small fitting at the end of many taps where the water comes out. Limescale and debris can collect inside it over time, restricting the flow.

Blocked tap aerator by limescale causing a weak water stream

 

Cleaning the removable aerator is a sensible first step. If the flow remains weak after cleaning, the restriction may be inside the tap or its connections.

Limescale Build-up

Limescale can accumulate inside tap components, particularly in areas with hard water. As deposits build up, they can narrow the passages through which water flows.

If the flow has gradually weakened, limescale may be contributing to the problem. A restriction deeper inside the tap may require professional cleaning or repair.

Debris in the Tap

Small particles of dirt, sediment or other debris can become trapped in the aerator, cartridge or internal filters. This can happen after plumbing work or when particles enter the supply and collect inside the fitting.

Debris clogging a under-sink pipe causing a lower water pressure

If cleaning the aerator does not restore the flow, a plumber can inspect the internal components and determine whether they need cleaning or replacement.

Partially Closed Isolation Valve

An isolation valve controls the water supply to an individual tap and is often found beneath a kitchen or bathroom sink. If it has not been fully opened, it can restrict the amount of water reaching the tap.

Check its position if it is safely accessible. Do not force a stiff or damaged valve, as this could cause a leak or damage the fitting.

Restricted Tap Cartridge or Internal Components

Many modern taps use a cartridge to control water flow and temperature. If the cartridge becomes worn, obstructed or damaged, it can reduce the flow through the tap.

Corroded tap cartridge that may restrict water flow

If the aerator is clear and the isolation valve is fully open, the cartridge or another internal component may be responsible. The correct repair depends on the type and model of tap fitted.

Kinked or Restricted Flexible Connection

A kinked, crushed or obstructed flexible hose can restrict the flow reaching the tap. If you can see the connections beneath the sink, look for obvious damage without disconnecting anything.

If the hose appears damaged or the cause is not obvious, ask a plumber to inspect it.

If you’ve noticed tap pressure low in just one fixture, check the aerator and isolation valve before assuming there’s a bigger plumbing issue.

If these checks do not resolve the problem, the restriction may be deeper within the tap or pipework. A plumber can investigate further without unnecessarily replacing components that are still in good condition. 

Why Did My Tap Pressure Drop After Plumbing Work?

If your tap pressure dropped after plumbing work, the issue may be related to something that was changed or disturbed during the job.

An Isolation Valve Has Not Been Fully Reopened

When a plumber works on a tap or pipe, the water supply is usually turned off using an isolation valve or the main stopcock. If the valve is not fully reopened afterwards, it can restrict the amount of water reaching the tap.

If the problem started immediately after the work, check whether any accessible valves appear to have been left partially closed. Contact your plumber if you are unsure whether they have been reopened correctly.

Debris Has Entered the Tap

Plumbing work can disturb sediment, limescale or other debris inside the pipework. These particles may become trapped in the tap’s aerator, filter or internal components, reducing the flow.

If only one tap is affected, cleaning its removable aerator may help. If several taps have developed weak flow, the restriction could be elsewhere in the system.

A New Tap Has Different Flow Requirements

A replacement tap may have different flow characteristics from the old one. Some taps have built-in flow restrictors or aerators, while others require a particular minimum supply pressure to operate as intended.

Check the manufacturer’s specifications before assuming the tap is faulty.

A Pipe or Connection Has Become Restricted

Work beneath a sink or behind a wall can sometimes leave a flexible hose kinked or a connection incorrectly positioned. Either can restrict the amount of water reaching the tap.

If your tap pressure remains low after plumbing work, contact the plumber who carried out the job. Explain when the problem started and which outlets are affected so they can investigate the relevant valves, connections and fittings.

Why Is My New Tap Pressure Lower Than the Old One?

If you have replaced a tap and noticed weaker flow, the new fitting may be the reason. Different taps are designed to work with different water pressures and flow rates, so a replacement tap may not perform in the same way as the one it replaced.

Different Pressure and Flow Requirements

Some taps need a minimum water pressure to deliver the expected flow. This is particularly important in homes with gravity-fed hot-water systems, where the available pressure may be lower than in a mains-fed supply.

If the new tap requires more pressure than your plumbing system can provide, the flow may be weaker than expected. Check the manufacturer’s specifications to make sure the tap is suitable for your home’s water supply.

Built-in Aerators and Flow Restrictors

Many modern taps have aerators or flow restrictors designed to control the amount of water coming out. These components can reduce the flow compared with an older tap that allowed more water through.

A lower flow rate does not automatically mean the tap is faulty. However, if the water barely trickles out, check the product specifications and whether the fitting is designed for your available supply pressure.

Differences in the Water Supply Configuration

The way your hot and cold water supplies are arranged can affect how a new tap performs. For example, a tap designed for a mains-pressure system may not work as expected when connected to a low-pressure hot-water system.

If the new tap has separate hot and cold connections, each supply may also deliver water at a different pressure. This can affect the balance of flow when you use the tap.

If your new tap has noticeably weaker flow than the old one, check that it is compatible with your plumbing system. A plumber can establish whether the issue relates to the tap’s specifications, the supply configuration or a restriction in the connections.

Why Is the Hot Tap Weak but the Cold Tap Fine?

If your hot tap has low water pressure but the cold water flows normally, the difference may come down to how your home’s water supply is configured. Hot and cold water do not always reach your taps at the same pressure, particularly in homes where hot water is supplied by a storage cylinder.

Plumber checking hot and cold water connections on a boiler

Understand Your Hot-Water System

In a gravity-fed system, hot-water pressure depends partly on the height of the cold-water storage tank above the tap. This can mean lower flow at hot taps than at cold taps supplied directly from the mains.

Other systems, such as combination boilers and unvented cylinders, work differently. The type of system you have affects the pressure available at your taps and the possible causes of reduced flow.

Consider Whether the Problem Is New

If your hot tap has always flowed more slowly than your cold tap, the difference may be related to the system’s design. However, if the hot-water flow has recently dropped, there may be a restriction in the hot-water pipework, a valve that is not fully open or an issue with the system itself.

In some systems, trapped air can also affect water flow.

If only one hot tap is affected, the problem may be local to that fitting. If several hot taps have weak flow, the hot-water supply or system may need further investigation. A plumber can determine whether the flow is normal for that setup or whether something needs repairing.

Why Is the Pressure Low Throughout the House?

If several taps have weak flow, the cause may be somewhere in your home’s main water supply or plumbing system rather than in an individual tap. The main stopcock, incoming supply, pressure-reducing valve or a leak may need investigating.

The Stopcock Is Not Fully Open

The main stopcock controls the water supply entering your home. If it has been left partially closed after plumbing work, it can restrict the amount of water reaching your taps.

Person checking the main water stopcock and supply valve to improve water pressure

If it is safely accessible, check that it is fully open. Do not force a stiff or damaged valve, as this could cause a leak.

A Faulty Pressure-Reducing Valve

Some plumbing systems have a pressure-reducing valve to control the pressure entering the property. If the valve develops a fault or is incorrectly adjusted, it can reduce the pressure available at several taps.

A plumber can check whether the valve is working correctly and whether it is affecting your home’s water supply.

A Problem With the Incoming Water Supply

Low water pressure throughout the house can be caused by a problem with the incoming water supply, including temporary supply issues or maintenance work in your area.

If possible, check whether your neighbours are experiencing similar problems. If they are, there may be a wider supply issue, so contact your water supplier to find out whether any disruptions have been reported.

You do not need to wait for your neighbours to experience the same problem before contacting your supplier. If low water pressure persists throughout your home, contact them to report the issue and ask them to check the supply to your property. You can also read Ofwat’s guidance on water companies’ responsibilities regarding water pressure.

A Leak in the Pipework

A significant leak in the supply pipe or internal plumbing can contribute to reduced water pressure or flow. Look out for visible damp patches on walls or ceilings, unexplained pooling water, discoloured patches or water continuing to run when all taps and water-using appliances are switched off. You may also notice an unexpectedly high water bill or the sound of running water when everything is turned off.

Hidden pipe leak beneath the floor causing water damage and reduced water pressure

Some leaks are hidden beneath floors, behind walls or underground, so they may not leave obvious signs. However, damp patches, mould or mildew growth, musty smells and unexplained increases in your water bill could indicate a hidden leak. Read our guide to leak detection to learn more about the warning signs and how to identify a possible leak in your home.

If you suspect a leak in the incoming water main, contact your water supplier to establish whether the issue falls under their responsibility or requires a plumber. If you find a leak inside your property, arrange for a plumber to investigate it.

A Restriction in the Internal Pipework

Even without a visible leak, a restriction in the pipework can limit the amount of water reaching your taps. A build-up of limescale, debris or a problem with a valve may affect the supply to multiple outlets, especially if they share the same pipework.

If the pressure has dropped throughout your home and the stopcock is fully open, a plumber can inspect the system to identify whether an internal restriction or another fault is responsible.

Pressure vs Flow Rate: Are They the Same Thing?

Water pressure and flow rate are related, but they are not the same. Water pressure is the force per unit area exerted by water within your plumbing system, usually measured in bar. Flow rate is the volume of water delivered over a set period, usually measured in litres per minute.

A weak stream can be caused by low water pressure or a restriction that limits the flow through the tap. A blocked aerator, restricted pipe or partially closed valve may reduce the amount of water reaching the outlet, even if the incoming supply pressure is normal.

This distinction matters when diagnosing a problem. A tap may have a restricted flow because of a blockage even when the incoming water pressure is adequate. Equally, low pressure throughout the property can affect the flow at several outlets.

When Is Low Pressure a Plumbing Problem Rather Than a Tap Problem?

If you have searched for tap pressure low and the simple checks have not helped, the next step is to establish whether the cause is within the tap, the internal pipework or the incoming supply.

A tap-specific problem is more likely when only one outlet is affected. A wider plumbing or supply problem becomes more likely when several taps have weak flow, the pressure drops significantly when multiple taps run, or both hot and cold supplies are affected.

Contact a plumber if:

  • The pressure has dropped suddenly, and you cannot identify the cause.
  • Several taps have weak flow despite the main stopcock being fully open.
  • Cleaning the aerator and checking accessible valves have not helped.
  • You notice damp patches, unexplained pooling water or other signs of a possible leak.
  • A new tap continues to deliver unusually weak flow despite being suitable for your water supply.

If you suspect a problem with the incoming water supply, contact your water supplier to report it. If the cause appears to be within your property’s plumbing, a plumber can inspect the affected fittings and pipework and recommend the appropriate repair.

Trying to fix the problem without identifying its cause could lead to unnecessary replacements or further damage.

Absolute Plumbing uk Van parked outside a residence

Need help because your tap pressure is low? Contact Absolute Plumbing Limited for professional assistance. Whether the problem affects one tap or your home’s wider water supply, the team can help identify the cause and advise on the next steps. Get in touch to arrange an assessment.

Frequently Asked Questions

Why Is My Cold Tap Pressure Low?

Low cold water pressure can be caused by a blocked tap aerator, a partially closed valve or a restriction in the cold-water pipework. If only one cold tap is affected, check its aerator first. If several cold taps have weak flow, the problem may be further back in your home’s water supply.

Why Is My Hot Tap Pressure Low?

Low hot water pressure may be caused by your hot-water system, a restricted pipe or a faulty valve. If the flow has always been weaker than the cold supply, your system type may explain the difference. A sudden drop in flow should be investigated.

Why Does Water Pressure Drop When Using Two Taps?

Water pressure drops when using two taps if the available supply cannot meet the combined demand or a restriction limits the flow. If the drop is significant, happens regularly or is worse than before, ask a plumber to check your plumbing system.

Can a Partially Closed Stopcock Reduce Water Pressure?

Yes, a partially closed stopcock can restrict the water entering your home and reduce flow at multiple taps. If it is safely accessible, check that it is fully open. Do not force a stiff or damaged valve, as this could cause a leak. 


Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.